IP55 / IK16
Vandal & weather resistant with virtually zero upward light
Post top mounting fitting for single or multi heads.
Steel arm support for fixing to zinc-coated steel body each finished in
chemical and abrasion resistant textured black polyester powder coat.
Suitable for 76mm mounting.
Control gear mounted upon hinged/removable tray.
Plug and socket fused connector block to ease installation
and maintenance.
Injection moulded polycarbonate Control Lens held against
polyethylene gasket by four socket cap stainless steel screws.
The Control Lens combines the strength of UV stabilised polycarbonate
with impressive control of light distribution to provide a square pattern of
illumination as distinct from the usual circular pattern obtained with this
type of luminaire. This offers the advantage of an increase in spacing
ratio and an improved uniformity thus reducing lighting points and
consequently capital, running and maintenance costs.
| SON |
|
| PT207/170LB | 1x70w 9.5kg |
| PT207/270LB (Multi-headed) | 2x70w 18.0kg |
| PT207/370LB (Multi-headed) | 3x70w 22.0kg |
| PT207/470LB (Multi-headed) | 4x70w 26.0kg |
| CMHTT* |
|
| PT207/1100LB | 1x100w 9.5kg |
| PT207/2100LB (Multi-headed) | 2x100w 18.0kg |
| PT207/3100LB (Multi-headed) | 3x100w 22.0kg |
| PT207/4100LB (Multi-headed) |
4x100w 26.0kg |
Options:
Frosted diffuser option add suffix F
For the addition of a photo electric cell add suffix 479
For white finish delete B and add suffix W
For grey finish to BS18B25 delete B and add suffix G
Complementary wall mounting fitting available
Complementary Ceiling fitting available
Notes:
*Supplied with UV stop CMHTT lamps as standard
NOTE: other lamp options available, details upon request
If column is supplied, finish is galvanised
Supplied with lamps (except export orders)